職人技が生み出す究極のマスターピース
組木などの伝統的な木工技術×革新的なデザイン性の融合で、使いやすさを追求。
Sort by:
13 products
13 products
MUGEN MUSOU「INFINITY」-Moss Green-
[The toe tip has undergone a minor change, and the attached spare toe tip has increased by one]
We have overturned common sense with our technology that is always ahead of the curve, and have created history and legends. We have also succeeded in overturning common sense with new technology. We evolve and move forward into the future. This "- INFINITY -" will invite you to new possibilities and individuality. I want you to imagine "Kendama that you can imagine and create".
【material】
Ball: Ash
Kenjiri: Maple
Tip: Maple
Spare: Ash/Sakura
String: Nylon (black)
Ken height: 16.4 cm Ken
Tip length: 4.5 cm
Ball size: 6.1 cm
Platter: 4.8 cm
Small plate: 4.4 cm
Middle plate: 3.9 cm
-With 2 replacement parts for the tip
● String slit adopted
●Medium countersunk hole type
[How to assemble]
1. This kendama can be disassembled into 4 parts.
<Ball, plate body, sword tip, middle grip plate>
2. There are 2 holes in the body and a hole through which the string is passed.
3. Pass the string from the top of the ball through the half-circle slit and tie the knot.
Four. Pull the string a little and insert the tip of the sword into the plate so that the groove dug in the tip of the sword comes to the string.
Five. A screw is attached to the tip of the sword, so it can be combined with the part of the grip middle plate.
6. At that time, the screws are tightened by rotating the middle plate of the grip (clockwise).
7. Rotate it in the opposite direction (counterclockwise) to loosen the screw.
8. Tighten until the groove dug in the tip of the sword is hidden. Also, there is a logo on the middle plate of the grip, so tighten it until it disappears.
9. Tighten until both marks are hidden and do not overtighten. Over-tightening may cause damage.
[Tips for when the toe tip does not come off]
1. Place the detached support parts on a flat floor.
2. Place the upper part on top of it so that the screws are not misaligned.
3.Put your palms on both sides of the body and apply your weight vertically from directly above to push up the toes.
4.Pull the toe straight with your finger to remove it.
5. After replacing the parts you like, insert each part so that the letter part is facing the front, and turn the lower part clockwise to assemble.
●Click here for the video. https://youtu.be/C60WQM__EKo
IWATA homepage https://iwata.fun/
●Customers who purchase MUGEN MUSOU will receive a special paper bag.
●One special paper bag is provided for each order, but if you need as many paper bags as you ordered (MUGEN MUSOU only), please write "paper bags for the number of bags required" in the remarks column when ordering. please give me.
*Kendama other than MUGEN MUSOU does not come with a paper bag.
*Because it is a wooden product, there are individual differences in weight, wood grain, knots, and color. Please note that the color of the product photos may differ slightly from the actual product due to monitor settings, etc.
MUGEN MUSOU「INFINITY」-Moss Green-
[The toe tip has undergone a minor change, and the attached spare toe tip has increased by one]
We have overturned common sense with our technology that is always ahead of the curve, and have created history and legends. We have also succeeded in overturning common sense with new technology. We evolve and move forward into the future. This "- INFINITY -" will invite you to new possibilities and individuality. I want you to imagine "Kendama that you can imagine and create".
【material】
Ball: Ash
Kenjiri: Maple
Tip: Maple
Spare: Ash/Sakura
String: Nylon (black)
Ken height: 16.4 cm Ken
Tip length: 4.5 cm
Ball size: 6.1 cm
Platter: 4.8 cm
Small plate: 4.4 cm
Middle plate: 3.9 cm
-With 2 replacement parts for the tip
● String slit adopted
●Medium countersunk hole type
[How to assemble]
1. This kendama can be disassembled into 4 parts.
<Ball, plate body, sword tip, middle grip plate>
2. There are 2 holes in the body and a hole through which the string is passed.
3. Pass the string from the top of the ball through the half-circle slit and tie the knot.
Four. Pull the string a little and insert the tip of the sword into the plate so that the groove dug in the tip of the sword comes to the string.
Five. A screw is attached to the tip of the sword, so it can be combined with the part of the grip middle plate.
6. At that time, the screws are tightened by rotating the middle plate of the grip (clockwise).
7. Rotate it in the opposite direction (counterclockwise) to loosen the screw.
8. Tighten until the groove dug in the tip of the sword is hidden. Also, there is a logo on the middle plate of the grip, so tighten it until it disappears.
9. Tighten until both marks are hidden and do not overtighten. Over-tightening may cause damage.
[Tips for when the toe tip does not come off]
1. Place the detached support parts on a flat floor.
2. Place the upper part on top of it so that the screws are not misaligned.
3.Put your palms on both sides of the body and apply your weight vertically from directly above to push up the toes.
4.Pull the toe straight with your finger to remove it.
5. After replacing the parts you like, insert each part so that the letter part is facing the front, and turn the lower part clockwise to assemble.
●Click here for the video. https://youtu.be/C60WQM__EKo
IWATA homepage https://iwata.fun/
●Customers who purchase MUGEN MUSOU will receive a special paper bag.
●One special paper bag is provided for each order, but if you need as many paper bags as you ordered (MUGEN MUSOU only), please write "paper bags for the number of bags required" in the remarks column when ordering. please give me.
*Kendama other than MUGEN MUSOU does not come with a paper bag.
*Because it is a wooden product, there are individual differences in weight, wood grain, knots, and color. Please note that the color of the product photos may differ slightly from the actual product due to monitor settings, etc.
For MUGEN MUSOU "INFINITY" - tip replacement kit -
INFINITY, which is at the forefront of customization, will debut a "tip replacement kit". It is a kit that allows you to be yourself and select the wood you think.
<Target kendama> ・INFINITY ・WAVE
[Case / Walnut] Walnut is used, and in order to bring out the natural beauty of the wood grain, it is coated with beeswax, which is a unique blend of naturally derived beeswax. A beautiful form without waste and a design made from the viewpoint of enjoying the grain of wood. Ken can be stored stylishly by being made with precision. There are two empty spaces, so you can store your own tip.
[Kensaki / Wenge] Wenge, which has a beautiful contrast between black and brown, is characterized by being hard to crush due to its high hardness. Because it is compatible with other parts, it will be a setting that you cannot experience with other kendama.
[Kensaki / Grenadilla] A reddish tree with a different color from Chinese quince. From the smooth touch, you will be able to feel the smoothness of the moment you enter the hole of the ball.
[Kensaki / Maple] Although it is an orthodox setting, it can be said that it is the most reliable combination. Moderate hardness does not impair the quality of the technique. You get a sense of stability and security.
[Materials] Case: Walnut / Magnet Tip: Wenge Tip: Grenadilla Tip: Maple *This product is only for the tip replacement kit. Please purchase INFINITY separately.
[How to build INFINITY]
1. INFINITY can be disassembled into 4 parts. <Ball, plate body, sword tip, middle grip plate>
2. There are 2 holes in the body and a hole through which the string is passed.
3. Pass the string from the top of the ball through the half-circle slit and tie the knot.
Four. Pull the string a little and insert the tip of the sword into the plate so that the groove dug in the tip of the sword comes to the string.
Five. A screw is attached to the tip of the sword, so it can be combined with the part of the grip middle plate.
6. At that time, the screws are tightened by rotating the middle plate of the grip (clockwise).
7. Rotate it in the opposite direction (counterclockwise) to loosen the screw.
8. Tighten until the groove dug in the tip of the sword is hidden. Also, there is a logo on the middle plate of the grip, so tighten it until it disappears.
9. Tighten until both marks are hidden and do not overtighten. Over-tightening may cause damage.
[Tips for when the toe tip does not come off]
1. Place the detached support parts on a flat floor.
2. Place the upper part on top of it so that the screws are not misaligned.
3.Put your palms on both sides of the body and apply your weight vertically from directly above to push up the toes.
4.Pull the toe straight with your finger to remove it.
5. After replacing the parts you like, insert each part so that the letter part is facing the front, and turn the lower part clockwise to assemble.
IWATA homepage https://iwata.fun/
●Customers who purchase MUGEN MUSOU will receive a special paper bag.
●One special paper bag is provided for each order, but if you need as many paper bags as you ordered (MUGEN MUSOU only), please write "paper bags for the number of bags required" in the remarks column when ordering. please give me.
*Kendama other than MUGEN MUSOU does not come with a paper bag.
*Because it is a wooden product, there are individual differences in weight, wood grain, knots, and color. Please note that the color of the product photos may differ slightly from the actual product due to monitor settings, etc.