MUGEN MUSOU
MUGEN MUSOU「INFINITY」-Moss Green-
¥15,730
Unit price perMUGEN MUSOU「INFINITY」-Moss Green-
[The toe tip has undergone a minor change, and the attached spare toe tip has increased by one]
We have overturned common sense with our technology that is always ahead of the curve, and have created history and legends. We have also succeeded in overturning common sense with new technology. We evolve and move forward into the future. This "- INFINITY -" will invite you to new possibilities and individuality. I want you to imagine "Kendama that you can imagine and create".
【material】
Ball: Ash
Kenjiri: Maple
Tip: Maple
Spare: Ash/Sakura
String: Nylon (black)
Ken height: 16.4 cm Ken
Tip length: 4.5 cm
Ball size: 6.1 cm
Platter: 4.8 cm
Small plate: 4.4 cm
Middle plate: 3.9 cm
-With 2 replacement parts for the tip
● String slit adopted
●Medium countersunk hole type
[How to assemble]
1. This kendama can be disassembled into 4 parts.
<Ball, plate body, sword tip, middle grip plate>
2. There are 2 holes in the body and a hole through which the string is passed.
3. Pass the string from the top of the ball through the half-circle slit and tie the knot.
Four. Pull the string a little and insert the tip of the sword into the plate so that the groove dug in the tip of the sword comes to the string.
Five. A screw is attached to the tip of the sword, so it can be combined with the part of the grip middle plate.
6. At that time, the screws are tightened by rotating the middle plate of the grip (clockwise).
7. Rotate it in the opposite direction (counterclockwise) to loosen the screw.
8. Tighten until the groove dug in the tip of the sword is hidden. Also, there is a logo on the middle plate of the grip, so tighten it until it disappears.
9. Tighten until both marks are hidden and do not overtighten. Over-tightening may cause damage.
[Tips for when the toe tip does not come off]
1. Place the detached support parts on a flat floor.
2. Place the upper part on top of it so that the screws are not misaligned.
3.Put your palms on both sides of the body and apply your weight vertically from directly above to push up the toes.
4.Pull the toe straight with your finger to remove it.
5. After replacing the parts you like, insert each part so that the letter part is facing the front, and turn the lower part clockwise to assemble.
●Click here for the video. https://youtu.be/C60WQM__EKo
IWATA homepage https://iwata.fun/
●Customers who purchase MUGEN MUSOU will receive a special paper bag.
●One special paper bag is provided for each order, but if you need as many paper bags as you ordered (MUGEN MUSOU only), please write "paper bags for the number of bags required" in the remarks column when ordering. please give me.
*Kendama other than MUGEN MUSOU does not come with a paper bag.
*Because it is a wooden product, there are individual differences in weight, wood grain, knots, and color. Please note that the color of the product photos may differ slightly from the actual product due to monitor settings, etc.
リニューアルオープン記念
MUGEN MUSOU
MUGEN MUSOU「INFINITY」-Moss Green-
¥15,730
Unit price perMUGEN MUSOU「INFINITY」-Moss Green-
[The toe tip has undergone a minor change, and the attached spare toe tip has increased by one]
We have overturned common sense with our technology that is always ahead of the curve, and have created history and legends. We have also succeeded in overturning common sense with new technology. We evolve and move forward into the future. This "- INFINITY -" will invite you to new possibilities and individuality. I want you to imagine "Kendama that you can imagine and create".
【material】
Ball: Ash
Kenjiri: Maple
Tip: Maple
Spare: Ash/Sakura
String: Nylon (black)
Ken height: 16.4 cm Ken
Tip length: 4.5 cm
Ball size: 6.1 cm
Platter: 4.8 cm
Small plate: 4.4 cm
Middle plate: 3.9 cm
-With 2 replacement parts for the tip
● String slit adopted
●Medium countersunk hole type
[How to assemble]
1. This kendama can be disassembled into 4 parts.
<Ball, plate body, sword tip, middle grip plate>
2. There are 2 holes in the body and a hole through which the string is passed.
3. Pass the string from the top of the ball through the half-circle slit and tie the knot.
Four. Pull the string a little and insert the tip of the sword into the plate so that the groove dug in the tip of the sword comes to the string.
Five. A screw is attached to the tip of the sword, so it can be combined with the part of the grip middle plate.
6. At that time, the screws are tightened by rotating the middle plate of the grip (clockwise).
7. Rotate it in the opposite direction (counterclockwise) to loosen the screw.
8. Tighten until the groove dug in the tip of the sword is hidden. Also, there is a logo on the middle plate of the grip, so tighten it until it disappears.
9. Tighten until both marks are hidden and do not overtighten. Over-tightening may cause damage.
[Tips for when the toe tip does not come off]
1. Place the detached support parts on a flat floor.
2. Place the upper part on top of it so that the screws are not misaligned.
3.Put your palms on both sides of the body and apply your weight vertically from directly above to push up the toes.
4.Pull the toe straight with your finger to remove it.
5. After replacing the parts you like, insert each part so that the letter part is facing the front, and turn the lower part clockwise to assemble.
●Click here for the video. https://youtu.be/C60WQM__EKo
IWATA homepage https://iwata.fun/
●Customers who purchase MUGEN MUSOU will receive a special paper bag.
●One special paper bag is provided for each order, but if you need as many paper bags as you ordered (MUGEN MUSOU only), please write "paper bags for the number of bags required" in the remarks column when ordering. please give me.
*Kendama other than MUGEN MUSOU does not come with a paper bag.
*Because it is a wooden product, there are individual differences in weight, wood grain, knots, and color. Please note that the color of the product photos may differ slightly from the actual product due to monitor settings, etc.
※木製品のため、重さ、木目、節、色に個体差があります。また商品写真の色合いは、モニター設定等により実物と多少異なる場合がありますので、あらかじめご了承ください。
※ご希望の重さがある場合は、すべてを正確にそろえることはできかねますが、在庫の中からできる限り近いものをお選びいたします。ご注文の際は、備考欄にご希望をご記入くださいませ。
※在庫状況によりご希望に添えない場合もございます。その際の返品・交換はお受けできませんので、あらかじめご了承ください。
組立方
1．このけん玉は、以下の4つのパーツに分解できます。
（玉・皿胴・剣先部・けん）
2．皿胴には、貫通穴と紐通し穴の2種類の穴があります。
3．玉の頂点から出ている紐を、皿胴の半丸のスリット側から紐通し穴へ通し、こぶ結びをしてください。
4．紐を軽く引き、剣先部に掘られている溝の位置に紐が来るように合わせてから、剣先部を皿胴に差し込みます。
5．剣先部にはネジが取り付けられており、けんと接続できる構造になっています。
6．けんを時計回りに回すことで、剣先部のネジが締まり、固定されます。
7．反時計回りに回すと、ネジが緩みます。
8．剣先部の溝が完全に隠れるまで締めてください。また、けんにはロゴが刻印されていますので、そのロゴが隠れる位置まで締めてください。
9．剣先部の溝とロゴの両方が隠れた時点で締め付けを止めてください。それ以上強く締めると、破損の原因となる可能性がありますのでご注意ください。
けん先が抜けない場合の外し方
動画でも手順をご確認いただけます：
https://youtu.be/2SBmdEt7tDo
1．すでに取り外してある「けん下パーツ」を、平らで安定した床の上に置いてください。
2．その上に「けん上パーツ（皿胴側のパーツ）」を、ネジの位置がずれないようにまっすぐ重ねてください。
3．皿胴の両側に手のひらを添え、真上から垂直に体重をかけてゆっくり押し込みます。
すると、内部のけん先が下から押し上がってきます。
4．押し上がってきたけん先を、指でまっすぐ引き抜いてください。
5．交換するけん先を差し込み、各パーツの文字やロゴが正面に揃うように位置を合わせます。
6．最後に、けん下パーツを時計回りに回して、しっかりと固定してください。
●動画はこちらをご覧ください。
お支払い方法
お客様の取引は高度なセキュリティ対策によって保護されており、情報は機密として安全に管理されます。
（株）イワタ木工コーポレートサイト https://iwata.fun/