Skip to product information
1 of 5




Regular price ¥11,000
Regular price Sale price ¥11,000
Sale Sold out
Tax included. Shipping calculated at checkout.

[It may take about a week to ship]


<Concept> Flames burning in the night sky

<Product description> Deep blue metallic with a smoke-like matte finish.

By adding a black gradation to the 7:3 ratio between the color and the wood grain, the colors are clearly separated, making it easy to see the rotation of the ball. The grip is finished with MUGENMUSOU's original paint to support tricks.

In the kendama world, it is the only specification that allows you to exchange wooden parts, so you can complete your own customization while enjoying the wood.

-With 2 replacement parts for the tip

● String slit adopted

●Medium countersunk hole type



Ball: Zelkova

Plate body: Maple

Kenjiri: Maple

Tip: Maple

Reserve: Karin Yellowbirch

String: Nylon

Ken height: 16.4 cm

Tip length: 4.5 cm

Ball size: 6.1 cm

Platter: 4.8 cm

Small plate: 4.4 cm

Middle plate: 3.9 cm

[How to assemble]

1. This kendama can be disassembled into 4 parts. <Ball, plate body, sword tip, middle grip plate>

2. There are 2 holes in the body and a hole through which the string is passed.

3. Pass the string from the top of the ball through the half-circle slit and tie the knot.

Four. Pull the string a little and insert the tip of the sword into the plate so that the groove dug in the tip of the sword comes to the string.

Five. A screw is attached to the tip of the sword, so it can be combined with the part of the grip middle plate.

6. At that time, the screws are tightened by rotating the middle plate of the grip (clockwise).

7. Rotate it in the opposite direction (counterclockwise) to loosen the screw.

8. Tighten until the groove dug in the tip of the sword is hidden. Also, there is a logo on the middle plate of the grip, so tighten it until it disappears.

9. Tighten until both marks are hidden and do not overtighten. Over-tightening may cause damage.

[Tips for when the toe tip does not come off]

1. Place the detached support parts on a flat floor.

2. Place the upper part on top of it so that the screws are not misaligned.

3.Put your palms on both sides of the body and apply your weight vertically from directly above to push up the toes.

4.Pull the toe straight with your finger to remove it.

5. After replacing the parts you like, insert each part so that the letter part is facing the front, and turn the lower part clockwise to assemble.

IWATA homepage

●Customers who purchase MUGEN MUSOU will receive a special paper bag.

●One special paper bag is provided for each order, but if you need as many paper bags as you ordered (MUGEN MUSOU only), please write "paper bags for the number of bags required" in the remarks column when ordering. please give me.

*Kendama other than MUGEN MUSOU does not come with a paper bag.

*Because it is a wooden product, there are individual differences in weight, wood grain, knots, and color. Please note that the color of the product photos may differ slightly from the actual product due to monitor settings, etc.

View full details